All Blogs
>
Lot Tracking and Recalls: What Happens at Your 3PL When a Batch Is Pulled

Lot Tracking and Recalls: What Happens at Your 3PL When a Batch Is Pulled

Written By
Hafez Ramlan
Last Updated:
November 19, 2026
Woman holding a clipboard in a warehouse aisle

Short answer: When a batch is pulled, a 3PL with lot tracking does three things fast: it identifies every unit of the affected lot on hand, quarantines that stock so it can't be picked, and stops any open order that would ship it. Then it gives you the records you need to run the recall: how many units of the lot it received, how many are still in the building, and which orders, customers and retail shipments already received it. With lot-level records, a recall touches one batch instead of your whole SKU. Without them, you are guessing, and the recall usually gets wider and more expensive.

This guide walks through a recall from the brand side, hour by hour, so you know what to expect from your 3PL and what to ask before you choose one. It is written for food, beverage, supplement and personal care brands. If you want the background on lot numbers, FEFO and expiration control, start with our guide to lot tracking and expiration date management.

What is a recall, and who decides how far it goes?

A recall is the removal or correction of a product already in distribution. For FDA-regulated products, the FDA classifies recalls by health risk under 21 CFR 7.3: Class I where there is a reasonable probability of serious adverse health consequences or death, Class II where the effects are temporary or medically reversible, and Class III where the product is not likely to cause adverse health consequences. Most recalls are started by the company itself.

Under 21 CFR 7.42, a recall strategy covers three things, and each one depends on records your 3PL holds:

  • Depth of recall: whether it reaches the consumer or user level, the retail level, or the wholesale level.
  • Public warning: whether the public needs to be alerted because the product presents a serious hazard.
  • Effectiveness checks: verifying that the people who received the product were reached, at levels from A (100% of consignees contacted) through C (10%), D (2%) and E (no checks).

You can't set the depth or run effectiveness checks without knowing exactly who received the affected lot. For a brand that ships through a 3PL, that list comes from the warehouse.

What happens at your 3PL in the first hours?

1. You send the lot numbers

The recall starts with you: your supplier, co-manufacturer, testing lab or a regulator identifies the affected lot or lots. Send the 3PL the SKUs, lot numbers, any date ranges, and the instruction to hold. Put it in writing, even if you also call.

2. The 3PL quarantines the affected stock

The warehouse places the affected lots on hold in its warehouse management system so they can't be allocated to new orders, then physically separates or tags the units. A good 3PL can do the system hold in minutes because every unit was scanned to a lot at receiving. If lots were not captured at receiving, the warehouse may have to hold the entire SKU until someone counts and checks labels by hand.

3. Open orders are stopped or re-picked

Orders that were allocated to the affected lot but haven't shipped need to be stopped or re-picked from a clean lot. This is where an order cutoff matters: orders picked earlier in the day may already be packed. Ask your 3PL how it catches orders in the pack and ship stages, not just those waiting to be picked.

4. The 3PL reports what it has and what has gone

Within the first day, you should have three numbers for each affected lot: units received, units on hand (now on hold), and units shipped. The shipped units should come with order-level detail: order number, ship date, customer and ship-to address for DTC orders, and the retailer, distribution center and purchase order for wholesale shipments.

How do you reach customers who already received the product?

This is where DTC brands have an advantage. When you ship direct, you have the name, address and email for every buyer, so a lot-level shipped list from your 3PL is effectively your consignee list. You can contact exactly the customers who received the affected lot, instead of everyone who ever bought the SKU, and you can document that you reached them for effectiveness checks.

Wholesale and retail shipments work differently. The retailer is your consignee, so you need the 3PL's records of which lot went to which distribution center on which purchase order, and the retailer runs its own recall process from there. Our guide to retail compliance and chargebacks covers the paperwork side of selling into retail through a 3PL.

What happens to the quarantined inventory?

  • It stays on hold until you decide what happens to it. Do not let it be cycle counted back into sellable stock.
  • Returns of the recalled lot should be received into the same quarantine location, not restocked. Tell the 3PL to check lot numbers on every return of that SKU until the recall closes.
  • Disposal, rework or return to supplier should be documented with counts and dates. You may need the records to show the recall was completed.

Expect charges for the extra work: holds, special counts, segregation, return processing and disposal are often billed as special projects or by the hour. Ask how your 3PL bills recall work before you need it.

What should you ask a 3PL about recalls before you sign?

  1. Do you capture lot numbers and expiration dates at receiving, for every unit, and is it scanned or typed?
  2. How fast can you place a system hold on a lot, and does the hold stop orders already allocated?
  3. Can you produce a report of every order that shipped a given lot, with customer and ship-to details, and how long does it take?
  4. Do you run mock recalls, and can we see the results of the last one?
  5. How do you handle returns of a recalled lot?
  6. How are recall-related labor, segregation and disposal billed?

A mock recall answers most of these at once. Pick a real lot, ask the 3PL to trace it from receiving to every shipment, and time how long it takes to get a complete answer. If the answer involves someone searching through spreadsheets, that is what a real recall will look like too.

How does lot tracking change the size of a recall?

Consider a brand selling one supplement SKU that has received four production lots over the year. A contamination issue is traced to one lot.

  • With lot-level records: the 3PL holds that one lot, re-picks open orders from the other three, and reports exactly which customers received the affected lot. The other lots keep selling.
  • Without lot-level records: the warehouse can't tell which units on the shelf or in customers' hands are from the affected lot. The brand has to hold all four lots and contact every customer who bought the SKU in the period, which can mean pausing sales of a bestseller.

The difference is not the recall itself, which the brand can't avoid, but how much of the business it takes down with it.

How does Atomix handle lot tracking and recalls?

Atomix offers lot tracking with FIFO and FEFO enforced automatically, which its pricing page says prevents expired product from shipping and lets a recall be isolated in one step. Its food and beverage fulfillment page describes lot-level tracing from receiving to shipment, verified with routine mock-recall drills, with expiry and lot tracking configured during onboarding. Supplement and wellness brands can see how this applies on the health and wellness fulfillment page. For what to look for in the building itself, see our guide to food-grade warehousing, and for supplements specifically, supplement and nutraceutical fulfillment.

Frequently asked questions

What does a 3PL do during a product recall?

It places the affected lots on hold so they can't ship, stops or re-picks open orders that were allocated to them, and reports how many units it received, still holds and shipped, with order-level detail for everything that already left the building.

Why does lot tracking matter for recalls?

It lets you limit a recall to the affected batch. Without lot records, you usually have to hold the whole SKU and contact every customer who bought it.

Who is responsible for a recall, the brand or the 3PL?

The brand owns the recall and its communication with customers and regulators. The 3PL holds the stock and the shipping records the brand needs to carry it out, so its records largely decide how precise the recall can be.

What is a mock recall?

A practice trace of a real lot from receiving to every shipment, timed to show how quickly and completely the warehouse can produce the records a real recall would need.

What happens to returned units from a recalled lot?

They should be received into quarantine, not restocked, and counted toward the recall records until the product is disposed of, reworked or returned to the supplier.

Sources: 21 CFR 7.3, definitions (recall classification); 21 CFR 7.42, recall strategy; Atomix food and beverage fulfillment; Atomix pricing and lot tracking. The four-lot example is illustrative.

Order Fulfillment
Thank you! Your submission has been received!
Oops! Something went wrong while submitting the form.
Book a meeting
Prev Post
Next Post
All Blogs
>
Lot Tracking and Recalls: What Happens at Your 3PL When a Batch Is Pulled

Hafez is the Marketing Manager at Atomix Logistics, where he creates blogs, guides, and other resources to help eCommerce brands streamline their logistics and scale their operations.

Ready to scale your fulfillment operations smarter and faster with Atomix?
Optimize your fulfillment operations and boost productivity with Atomix. Start today by booking a free strategy session with an industry expert.